What is a good contention ratio?

Contention ratio is the amount (or ratio) of an Internet service provider’s bandwidth that is shared between clients. The best contention ratio is a 1:1 (a low ratio). A low contention ratio means that more bandwidth is available to you on the network at any time. The lower the contention, more expensive the service.

What is maximum contention ratio?

Contention ratio refers to the maximum demand divided by the actual bandwidth available on a connection. So, basically, if an ISP has a bandwidth of 40Mbps and they’ve got 1,000 people with connections of 2Mbps, the ratio is 50:1, which is average for home connections.

What is contention ratio in networking?

Let’s start off with the definition, contention ratio describes the number of users that are sharing data capacity on a network. A contention ratio of 50:1 is the standard rate for home networks. This ratio means that 50 people are likely to be using the same bandwidth as you at any one time.

What is common contention ratio for home users?

A contention ratio of 50:1 (typical for ADSL broadband) means there are up to 50 people on one connection. This is often why you experience slower speeds during peak usage times.

Does FTTP have contention?

Contention – FTTP is a shared service, usually shared less than traditional ADSL but the contention ration is usually around 20:1. Leased Lines are shared with no one giving you 1:1 contention. This makes a big impact at peak times with stability of the line.

Is FTTP contended?

FTTP Broadband (Fibre to the Premises) As with copper based broadband, fibre based FTTC and FTTP services are contended, with no SLAs or fix time guarantees. However, the increased speeds available are attractive to many customers in areas where the service can be received.

How do you calculate contention ratio?

To figure out your contention ratio, you basically have to find out how much bandwidth you have available, and then figure out the maximum amount of bandwidth you have “sold”.

What is BT contention ratio?

Broadband Contention Ratios is the total number of households sharing the available bandwidth on an internet/data connection. The standard contention ratio was 50:1 for home broadband and around 20:1 for business broadband but BT now report that those figures are no longer accurate.

Are all Internet providers the same speed?

Remember – not every provider offers every speed tier. Right now, Basic NBN 12 speeds are being phased out, and are only offered by smaller providers such as Flip and TeleChoice.

What is the contention ratio of Airtel?

The regulations for consumers are 1:50 and 1:30 for residential and business customers respectively. In other words, if I have 100 megabits of bandwidth to the outside world, I can supply no more than 5,000 residential customers.

Is BT FTTP contended?

Is leased line FTTP?

A leased line, also called a fibre leased line, is a dedicated fibre optic service provided directly to the premises. Unlike FTTP, a leased line connects directly to the public internet over a dedicated fibre optic cable; there’s no sharing of infrastructure as there is with FTTP.

Which is the best definition of contention ratio?

Contention ratio is the term used to for the number of users that are currently sharing data capacity. If you have a lower contention ratio you will get faster broadband. For example, a contention ratio of 75:1 means that 75 broadband users are currently sharing the same bandwidth.

What should the contention ratio be for BT?

Standard contention ratios used to be around 50:1 for home broadband, and 20:1 for business broadband – but BT says these figures are no longer completely accurate. When your contention ratio is high – meaning a lot of people are connected to the same line as you – it can potentially drag down your broadband speeds.

How does contention ratio affect your Internet speed?

Your line speed only tends to be seriously affected by a poor contention ratio if you’re subscribed to standard ADSL broadband. Fibre optic broadband, on the other hand, has a far higher capacity – so more people can share a line at once without getting a major dip in speeds.

What’s the contention ratio for a 100MB line?

If the line you have access to is a 100Mb one, for example, you can easily get average speeds of around 35Mb or 63Mb on a good day. But if your contention ratio is 50:1, with 50 people connected to it, and you’re all using it at once… you’ll only get speeds of about 2Mb.