How much does it cost to have pavers installed around pool?

Your pool deck pavers material cost will largely come down to the type of paver you choose. You can see the full paving cost breakdown below, but overall, swimming pool pavers cost between $5 and $40 per square foot. In total, homeowners usually spend between $490 and $1,032 to install pavers around a pool.

Are pavers good around a pool?

Concrete pavers are a great option for pool decks because they are durable; chlorine and salt resistant, and can provide the look of natural stone. Pavers also provide good traction and are comfortable underfoot, because the joints take on moisture that helps cool the surface.

How much will pavers settle after compacting?

Here’s why: dirt shrinks by 30% when compacted. That means, if you backfill with dirt, your hardscape will settle 30%. This becomes an issue because, if you backfill with 10″ of dirt, your pavers will settle around 3″ over time. However, if you properly lay a gravel base, you’ll essentially eliminate settling.

How Much Stone Do I need to go around my pool?

The precise conversion depends on the type of gravel you intend to lay. Standard gravel weighs approximately 2,700 pounds per cubic yard. Multiply 2,700 by the total number of cubic yards. For a trench requiring 1.97 cubic yards of gravel, multiply by 2,700 for a total of 5,338 pounds.

How much does it cost to install pool coping?

Pool Coping Costs Expect to pay between $30 and $50 per linear foot to install pool coping. This is the ledge around the edge of an in-ground pool, often in stone or concrete.

What is the best pool coping?

Choosing the Best Pool Coping

• Pool Coping Made With Brick. Brick is always a classic material to use for pool coping.
• Pool Coping Made With Stone. Stone pool coping adds natural beauty to the area surrounding your swimming pool.
• Pool Coping Made With Travertine.
• Pool Coping Made With Concrete.

Are pavers hard to maintain?

Patio pavers do require maintenance, but it’s not as hard as you think. Cleaning patio pavers can be simple if you are consistent. With a little bit of work, you can make sure your patio is always stunning at a moment’s notice. Read on to discover 10 tips to care for your patio pavers and keep them looking brand new.

How long do pavers need to settle?

Let it Settle We often recommend that after having a new paver hardscape installed, you wait two to three months before having your pavers sealed. This allows for that shifting and any adjustments that may be necessary before it is set and sealed.

What is best to put around pool?

Landscaping Around Your Above Ground Pool

• Concrete or Pavers. Concrete patios are a dependable and easy to care for option for your poolside.
• Gravel or Rock. Using gravel or rock is one of the most popular ways when landscaping around your above ground pool.
• Plants or Trees.
• Planters.

  When to replace pavers on a pool deck?

  If you are still having an issue with mold and fungus, call in a professional to take a look at your drainage system to make sure there isn’t a bigger issue going on. Again, paver decks are great as the pavers can be easily removed and replaced if plumbing work is needed.

  Which is the best material for pool pavers?

  The durability of the paving materials allows for optimum performance for many years. Additionally, most surfaces are textured, which makes them safe even under wet conditions as they are non-skid, non-slip.

  What should I know about paving around my pool?

  Care must be taken not to damage the swimming pool when compacting. Carefully consider slopes and drainage around your pool. It is recommended that paving slope by 1% away from the pool. Sand grouting will easily wash out on a pool surround and cement grouting has the tendency to pop out on paving around pools.

  Why are paving stones used for pool decks?

  Pool decks built from paving stones will last longer than the alternatives. The durability of the paving materials allows for optimum performance for many years. Additionally, most surfaces are textured, which makes them safe even under wet conditions as they are non-skid, non-slip.

  How are pavers set on a pool deck?

  The stones are set in a sand base, which means they remain flexible but don’t shift position. Contraction and expansion during weather changes will not be an issue. Most deck pavers are dense and resist water penetration. The joints in between each stone, in addition to proper grading preparation, allow for optimal drainage.

  Which is better to pave around a pool or patio?

  Installation costs may run higher than for concrete, but building a pool deck or patio with pavers may be a project that do-it-yourselfers can manage. Cement pavers are the most economical, have all the advantages of slab concrete and can be installed to minimize cracking concerns.

  How much does it cost to pave around a pool?

  Choose from a wide variety of materials to frame your pool. Poured concrete provides a comparatively economical paving around your pool, costing an estimated $12 to $16 per square foot as of March 2014, depending on where you live, according to retailer River Pools and Spas.

  What can I do to extend the life of my pavers?

  To extend the life of your pavers, apply a salt-resistant sealant. The sealant not only prevents the salt in your pool water from damaging the pavers but also stabilizes the sand between your paver joints and stops splashed water from washing it into the pool. Apply sealant to all pavers within at least six feet of the edge of your pool.