Most popular

Why is my line protocol down?

Why is my line protocol down?

The line protocol being down indicates a clocking or framing problem. Probable reasons for this are encapsulation and clock rate mismatches. Ethernet0 is administratively down, line protocol is down: This output indicates that a local interface has been manually shut down using the shutdown command.

How do I know if my GRE tunnel is up?

To display GRE tunneling Information, use the following commands:

  1. show ip interface.
  2. show ip route.
  3. show ip interface tunnel.
  4. show ip tunnel traffic.
  5. show interface tunnel.
  6. show statistics tunnel.

How do I reset my GRE tunnel?

Clearing GRE statistics

  1. Use the clear ip tunnel command to clear statistics related to GRE tunnels.
  2. Syntax: clear ip tunnel { pmtud tunnel-ID | stat tunnel-ID }
  3. Use the pmtud option to reset a dynamically-configured MTU on a tunnel Interface back to the configured value.
  4. Use the stat option to clear tunnel statistics.

How do I know if my Cisco tunnel is running?

You can use the standard show interface command on a tunnel interface to see a considerable amount of useful information about it: Router1# show interface Tunnel5 Tunnel5 is up, line protocol is up Hardware is Tunnel Internet address is 192.168.

What is status up protocol down?

Protocol refers to “Line Protocol”, which is a Cisco way of saying “the connection”. Basically, up/down means the port is available for a cable/connection, but doesn’t have one. Check the cable, or other computer.

What is the reason that the interface status is administratively down line protocol down?

The CLI status output “Serial0/0/0 is administratively down, line protocol is down” means that either the router interface is configured with the “shutdown” interface configuration command or a duplicate IP address exists. If there are duplicate addresses, resolve the conflict by changing one of the IP addresses.

Is GRE tunnel encrypted?

A GRE tunnel functions like a VPN but without the encryption; it transports packets from one endpoint to another through the public network. GRE tunnels typically use keepalive packets to determine if a tunnel is up.

Is GRE tunnel secure?

As mentioned earlier, GRE is an encapsulation protocol and does not perform any encryption. Creating a point-to-point GRE tunnel without any encryption is extremely risky as sensitive data can easily be extracted from the tunnel and viewed by others.

How can I check ASA tunnel status?

To see if the tunnel is up you can use the “show crypto isakmp sa” or “show crypto ipsec sa” command.

How do I check Cisco VPN tunnel status?

From the Wired Client, browse to http://dcloud.cisco.com/ to access the Cisco dCloud UI and then log in with your Cisco.com credentials. Use the Bandwidth Test to verify that the port needed for VPN connectivity (TCP 443) is not blocked at your site. From the Wired Client, ping AD1 at 198.18. 133.1.

What does an up down interface status mean?

Basically, up/down means the port is available for a cable/connection, but doesn’t have one. Check the cable, or other computer.

What does the Serial 0 is administratively down line protocol is down line indicate with certainty?

What does the Serial 0 is administratively down, line protocol is down line indicate with certainty? There is no problem with the physical connectivity.