What is the default admin password for NETGEAR routers?

When you buy a new NETGEAR router, it is configured with factory default settings. When you use the local web address www.routerlogin.com to access your router’s web interface, the user name is admin and the default password is password.

How do I log into my Netgear router as an administrator?

To log in to your NETGEAR router with a web browser:

1. Launch a web browser from a device that is connected to your router’s network.
2. Enter the router admin user name and password. The user name is admin. The password is the one that you specified during setup. The user name and password are case-sensitive.

How do I reset my NETGEAR DGN2200?

Press and hold reset button on the bottom of the router for 1 second to reset the router. Press the reset button for more than 6 seconds until the Power LED flashes red to trigger a reset to factory default settings.

How can I find my Netgear router password?

To recover your admin password using the password recovery feature:

1. Launch a web browser from a computer connected to your router’s WiFi network.
2. Enter routerlogin.net or routerlogin.com into your web browser’s address bar.
3. Click CANCEL.
4. Enter your router’s serial number.
5. Click CONTINUE.
6. Answer your security questions.

Do all Netgear routers have the same password?

NETGEAR routers usually have a default password of password and a default IP address of either 192.168. 1.1 or 192.168. 0.1. However, like the table below shows, there are plenty of exceptions.

How do I change my Netgear wireless password?

Launch an Internet browser and type http://www.routerlogin.net into the address bar.

1. Enter the router user name and password when prompted.
2. Click OK.
3. Select Wireless.
4. Enter your new network name in the Name (SSID) field.
5. Enter your new password in the Password (Network Key) fields.
6. Click the Apply button.

What is the password for router login?

admin
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly.