Helpful tips

Is DDR3/1600 the same as PC3-12800?

Is DDR3/1600 the same as PC3-12800?

PC3-12800 (12800 MB/sec) is the same thing as DDR3 1600MHz (1600 MHz data transfer rate) and it runs at 800 MHz DDR clock. Similarly for others, just divide/multiply by 8. Any memory that has the correct voltage and capacity and is same or faster than what is supported by the board should work in the board.

Is 1600 MHz RAM fast for DDR3?

DDR3 1600mhz RAM A DDR3 1600 Mhz RAM operates at a 1600 MHz clock, and a 1600 MHz clock cycle takes only 0.625ns to perform, meaning it is very fast and can handle most tasks, including gaming. For most games, 1600mhz RAM is a good enough speed.

What does 8GB 1600 MHz DDR3 mean?

Answer: A: Answer: A: it the ram Random access Memory your computer has Onboard (Motherboard or the board inside your computer) . LPDDR3 is the type or grade of ram, which is really good. 8 GB of Ram is really good to have.

What PC3-12800 800Mhz?

PC3-12800 = DDR3-1600. DDR means “Double Data Rate”. So DDR3-1600 means it is 800Mhz with a double rate (effectively 1600Mhz). In short, 800Mhz is the right number.

What is DDR3 PC3-12800?

Kingston Memory he next generation of DDR3 has arrived. DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Is 8GB 1600MHz RAM good?

8GB of ram at 1600MHz is quite enough for gaming, in fact, you don’t really need a super ram for gaming, what makes the difference in that sector is the graphics card. Check the benchmarks and buy a good price/quality one, that’s the thing you should focus on! RAM speed gets into play into loading of programs.

Is higher frequency RAM better?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

Can I use 1600Mhz RAM instead of 800mhz?

Newer RAM modules available in the market will have higher frequency like 1333 Mhz and 1600Mhz. So can you put a 1600 Mhz RAM module in a slot that supports only 1066/800 Mhz RAM modules. Theoretically it is supposed to work. The RAM stick should simply run at the lower clock frequency.