How do I reactivate my AT line?

Reactivate wireless service

1. Go to Account & services > My wireless.
2. Scroll and select the device you want to unsuspend > Manage device & features.
3. If prompted, select See device options.
4. Next to the suspended device, select Reactivate.
5. Follow the prompts to reactivate service on your device.

How do I fix a bad AT WiFi connection?

Steps to Fix Slow AT Internet

1. Disable Other Connected Devices. If you are using Wi-Fi on many devices in your house, disconnect the other devices.
2. Stop Background Data Usage.
3. Scan your PC for Malware.
4. Change your Router Location.
5. Update your System.
6. Reset Your Router.
7. Use WiFi Extender.
8. Contact AT.

Why is my AT connection not working?

Reset your modem or gateway Reset the receiver by holding down the POWER button on the front of the receiver for 10 seconds. The reset takes 5 to 8 minutes. If you have multiple receivers, reset your wireless gateway by unplugging it from its power source. Wait a few minutes, then plug it back in.

How long does it take for ATT to fix outages?

When I called yesterday, I was advised that outages are typically resolved within 24 hours.

Can I reactivate an old AT SIM card?

Go to att.com/suspend. Select Reactivate next to the suspended device. Follow the prompts to reactivate it.

What lights should be on my router?

Internet (White / Amber) – The Internet LED is solid white when connected to the Internet. It blinks white while the router works to establish a connection. A solid amber LED indicates the connection is down due to configuration issues. Amber blinking indicates that the connection is down due to hardware issues.

Why is my Wi-Fi not working?

If your Android phone won’t connect to Wi-Fi, you should first make sure that your phone isn’t on Airplane Mode, and that Wi-Fi is enabled on your phone. If your Android phone claims it’s connected to Wi-Fi but nothing will load, you can try forgetting the Wi-Fi network and then connecting to it again.

How do I troubleshoot my AT router?

Restart your gateway or modem manually

1. Unplug the power cord from the back of your gateway or modem.
2. Wait 20 seconds.
3. Put the internal battery back in, if you have one.
4. Plug the power cord back in.
5. Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.

How do I fix AT no service?

No signal or no service – search for network….Reset the network

1. From the home screen, tap the settings icon.
2. Scroll down and select General.
3. From the general screen, scroll down and select reset.
4. You will be taken to the reset screen. Select Reset Network Settings. Resetting the network deletes saved Wi-Fi Networks.

How do you connect a second at & T U-verse line?

If you ordered a second AT U-verse Voice service line (with a different phone number), follow the instructions below: A. Disconnect the phone cord from your primary phone and connect a voice line splitter to the Gateway. B. Connect the phone cables of both phones to the first and second ports of the splitter.

Why did my at & T DSL line go out?

Apparently an AT tech messed with things a little too much and knocked out my DSL service attempting to “fix” someone else’s phone line that another tech had messed up (a sort of domino effect). Of course this all happened right before the Fourth of July holiday weekend and so another tech finally came out the Monday after.

How long does it take to connect at & T home phone jacks?

(OPTIONAL) Approximate time: 15 minutes These steps will enable you to use your existing home phone jacks with your AT U-verse Voice service. Note: You must follow steps 1, 2, and 3 inside (connect your primary phone, power up, and complete your mandatory activation call) before attempting to connect your home phone jacks.

How to contact at & T customer service by phone?

Contact AT by phone or live chat to order new service, track orders, and get customer service, billing and tech support. Internet or TV support: 800.288

How to report downed at & T phone lines?

Did you find drooping wires, downed lines, or AT equipment in a yard or on the street? Let us know. Call us anytime at 800.288

If you ordered a second AT U-verse Voice service line (with a different phone number), follow the instructions below: A. Disconnect the phone cord from your primary phone and connect a voice line splitter to the Gateway. B. Connect the phone cables of both phones to the first and second ports of the splitter.

How to call at & T for pole issues?

You must have missed this part and the number is the same for pole issues. Call 800.288

How to troubleshoot an at & T prepaid phone?

1 Turn your phone off and back on. 2 Make sure you have service in your area. 3 Activate your AT PREPAID account, refill your minutes, or renew expired AT PREPAID plans at the AT PREPAID Support Center. 4 Be sure that you and your callers use 10- or 11-digit dialing when placing calls.