How do I log into EdgeRouter Lite?

Use the Ubiquiti Device Discovery Tool in the section above to automatically open a session to the Web UI. Access the Web UI manually by navigating to https://192.168.1.1 using your favorite browser. Access the EdgeRouter’s Command Line Interface (CLI) using either SSH or the Console port.

How do I access my ubiquiti EdgeRouter?

Establishing Initial Connectivity

1. Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter.
2. Configure a static IP address on your computer in the 192.168.
3. Open a Web Browser and enter https://192.168.1.1 in the address bar.
4. Log into the router using the default credentials.

How do I SSH into EdgeRouter?

By default, Ubiquiti Edgerouter devices expect users to log in via SSH with a username and password. A user named charles , for example, would log into a device at 10.0. 1.1 by typing ssh [email protected] and then filling in the password at the prompt.

How do I change my LAN IP on EdgeRouter?

You can do this using the CLI button in the GUI or by using a program such as PuTTY.

1. Enter configuration mode. configure.
2. Delete the existing configuration from the eth1 interface. delete interfaces ethernet eth1.
3. Assign the new LAN IP address to the eth1 interface.
4. Commit the changes and save the configuration.

How do I reset my EdgeRouter Lite?

Reset To reset to factory defaults, disconnect the Power Adapter from the Power port. Press and hold the Reset button while connecting the Power Adapter to the Power port. Keep holding the button until the right LED on port 2 starts flashing and then stops after a few seconds.

How do I login to ubiquity?

Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.

How do I set a static IP on EdgeRouter?

CLI: Access the EdgeRouter Command Line Interface.

1. Enter configuration mode. configure.
2. Delete the existing IP address configuration from the WAN interface.
3. Assign the IP address(es) to the WAN interface.
4. Add the default gateway address.
5. Add the DNS servers.
6. Commit the changes and save the configuration.

How do I reset my ubiquiti EdgeRouter Lite?

How do I access Ubiquiti network?

How do I change my LAN IP address Windows 10?

To enable DHCP or change other TCP/IP settings

1. Select Start , then select Settings > Network & Internet .
2. Do one of the following: For a Wi-Fi network, select Wi-Fi > Manage known networks.
3. Under IP assignment, select Edit.
4. Under Edit IP settings, select Automatic (DHCP) or Manual.
5. When you’re done, select Save.

How do I make my EdgeRouter default?

EdgeRouter to factory defaults: Runtime reset (recommended) The EdgeRouter should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the eth4 LED starts flashing and then becomes solidly lit.

How to access 192.168.1.1?

Open your browser which is connected to the Netgear Router.

What is the default router IP address?

The default IP Address of a TP-Link Router is 192.168.o.1 or 192.168.l.l. Previously, they do have a domain tplinklogin.net that brings the same user dashboard and now it is now retired. It is must to know the IP address of the wireless router to modify the settings as desired.

What is the most common router IP?

Although 192.168.1.254 is the default IP address for most common broadband routers, there are other addresses that your router might use. If you didn’t buy the router yourself and it was instead provided by your ISP, the address might also be something different.

How to find your router’s IP address?

Log in to your router.